Amplifier PWM for LED lighting 45A

The EPM-153 amplifier is a 3 channel PWM signal amplifier for LED lighting designed to work with any LED drivers or dimmers working with PWM modulation.

With special output channels for very large ampacity (3x15 A), the amplifier allows the connection of LED consumers to maximum power of 1080 W (24 V), which allows building even a very large LED lighting systems based on only one RGB controller or LED dimmer. What is more, you can connect several such amplifiers to one driver to obtain control of very high power and keep the synchronization of your installation. Additional advantage is low heat dissipation by the amplifier due to high efficiency outputs. Each output channel has a built-in advanced suppression filters that eliminate or minimise interference and surges to the limit values defined by the standards. This lets you use EPM-153 LED amplifiers safely and in accordance with the legal regulations in all environments (home, business, slightly industrialised and industrial). Provided that the whole LED lighting installation is properly designed and constructed. For longer supply lines, we recommend connection of an additional FPP filter at the end of each line from the amplifier to the LED light sources.

The EPM-153 has 3 fully galvanized inputs for PWM signal for automatic detection of the polarity of the connected control device. This allows am LED expander to cooperate with drivers with both common positive or negative terminals. In addition, there are digital circuits for interference filtering and improving PWM sequences installed at the inputs to improve quality of signals entering the LED expander, which means that a signal will be regenerated even with long cables and with interferences caused by the receivers directly connected to the controller.

The EPM-153 amplifier is a 3 channel PWM signal amplifier for LED lighting designed to work with any LED drivers or dimmers working with PWM modulation.

With special output channels for very large ampacity (3x15 A), the amplifier allows the connection of LED consumers to maximum power of 1080 W (24 V), which allows building even a very large LED lighting systems based on only one RGB controller or LED dimmer. What is more, you can connect several such amplifiers to one driver to obtain control of very high power and keep the synchronization of your installation. Additional advantage is low heat dissipation by the amplifier due to high efficiency outputs. Each output channel has a built-in advanced suppression filters that eliminate or minimise interference and surges to the limit values defined by the standards. This lets you use EPM-153 LED amplifiers safely and in accordance with the legal regulations in all environments (home, business, slightly industrialised and industrial). Provided that the whole LED lighting installation is properly designed and constructed. For longer supply lines, we recommend connection of an additional FPP filter at the end of each line from the amplifier to the LED light sources.

The EPM-153 has 3 fully galvanized inputs for PWM signal for automatic detection of the polarity of the connected control device. This allows am LED expander to cooperate with drivers with both common positive or negative terminals. In addition, there are digital circuits for interference filtering and improving PWM sequences installed at the inputs to improve quality of signals entering the LED expander, which means that a signal will be regenerated even with long cables and with interferences caused by the receivers directly connected to the controller.

/Manufacturer’s description/