LED controller RGB EC-11RGB





Description
LED controller RGB EC-11RGB
EC-11RGB is a miniature, fully digital LED controller RGB with very rich features for such a small device. This controller enables the creation of both dynamic and static colour effects, with 15 preloaded dynamic programs with a pause function. The controller is operated with two momentary switches (integrated with the controller’s board or external connected to inputs A or B) with 6 functions:
- change of program
- change of general brightness
- change of effects playback
- pause of a program
- controller on/off
- reset and return to program 1.
3 outputs 5A each let you connect loads up to 180W in LED RGB lights directly to the controller. The device is compatible with LED strips (or a different LED lights) with common positive connection. The EC-11RGB controller features a programming mode which enables the user/installation engineer define memory options (i.e. the parameters to “remember” and use by the device after switching off and on again), the reaction for power supply activation (stand-by mode or automatic activation) and the mode of switching on and off in a smooth or instant way. From version 2.0 up, the unit uses PWM modulation (550 Hz) which enabled almost complete elimination of light flickering in cameras or other digital image capturing devices. Flickering is possible only in certain cases on super-motion cameras. The controller is compatible not only with LED RGB light sources. You can also connect mono colour LED strips or similar light sources to the controller and use it as a 3-channel light effects controller.
/Manufacturer’s description/
Technical data
Supply voltage | 12 VDC (+/- 20%) |
Dimension | 52 x 36 x 16 mm |
The cross-section cubes output channels | OC |
The frequency of the PWM control signal | 550 Hz |
Outputs load capacity | 3 |
Total power consumption | 15A (3 x 5A) |
Current consumption without load | < 6 mA |