Menu
Newsletter
Languages
RGB Controller / LED dimmer for DMX512
0
Description
EC-133 DMX is a 3-channel controller (dimmer) for LED lighting using DMX protocol, universally used in stage and studio lighting. Depending on the type of connected LED light source the device may work as an RGB controller or a 3 channel LED dimmer. The unit is fully compatible with DMX 512; the most important features:
- housing for installing on TS-35 (DIN) rail
- 3 PWM output channels with consecutive addresses
- continuous current ampacity for each channel up to 7A
- 16 bit LED control resolution (PWM)
- implemented human eye sensitivity characteristics (ideal linear dimming)
- brightness adjustment range from 100 to 0.1 % (255 steps)
- an integrated RGB diode for signalling the device’s operation mode
- very easy installation and maintenance-free operation
- easy addressing from DMX bus
3 outputs 7 A each let you connect loads up to 250W in LED lights. You can create attractive and advanced lighting systems thanks to the possibility to use DMX 512 protocol, i.e. the universal standard for stage, TV but more and more often in housing buildings.
Similar to other devices in our range, the EC-133 DMX controller is designed for professional use and features very high quality, reliability and complies with all Polish and EU legal requirements.
/Manufacturer’s description/
Technical data
| Supply voltage | 12 VDC (+/- 30%) |
| Dimension | 87 x 35 x 59 mm |
| The cross-section cubes output channels | 21A (3 x 7A) |
| The frequency of the PWM control signal | 16 bit |
| Outputs load capacity | 3 |
| Total power consumption | - |
| Current consumption without load | - |